RS2 IntegrationNetLink integration with RS2 provides alerts and control capabilities to Access It! Universal.NET. Power system alerts and system control features are available directly from the Access It! interface, streamlining system maintenance and maximizing system uptime. Integration to Access It! is via the native Mercury Integration and is supported by RS2.  Requirements & InformationItem | Information | Access It! Universal.NET Version Supported | 6.1 or higher | RS2 License Required | None | NetLink Boards Supported | NL2, NL4 | NetLink Minimum Firmware Version | 9.18 or above | Integration Type | PSIA / XML | Integration Level | Alerts & Control | Supported AlertsAlert | Supported | AC Fault Alert | ● | System Fault Alert | ● | Fire Alarm Active | ● | Power Supply Service Due | ● | Insufficient Battery Standby Time | ● | Battery Replacement Due | ● | M8 Output Voltage Out of Range | ● | M8 Output Current Out of Range | ● | Enclosure Temperature Out of Range | ● | External Temperature (IDF Closet) Out of Range | ● | Tamper Switch Alert | ● | Device Detect (Connected or disconnected from NetLink) | ● | Current Sensor Out of Range | ● | Auxiliary Voltage Out of Range | ● | Values ReportedValue | Supported | AC Input Voltage | | Power Supply Output Voltage | | Power Supply Total Output Current | | Battery Voltage | | Battery Charge / Discharge Current | | M8 Output (Lock) Voltage | | M8 Output (Lock) Current | | M8 Output (Lock) Cycle Count | | Enclosure Temperature | | External Temperature (IDF Closet) | | Current Sensor Measurement | | Auxiliary Voltage Measurement | | Control FeaturesControl Item | Supported | Start / Schedule Automated Battery Test | ● | Power Cycle M8 Output | ● | Power Cycle Power Supply Main Output | ● | NetLink Control 1 / Control 2 Outputs | ● | |