1. Products
  2. Unified Power
  3. Paxton Unified

LifeSafety Power lead times for all Traditional, Unified and ProWire power systems are 10 days or less.

Paxton Unified Power Solutions®

All-in-one multi-door power solutions for Paxton Net2 and BLU controllers. Single and Dual Voltage, Standard and Networked.

Paxton Unified Power Solutions offer maximum flexibility, functionality and savings to access system designers.

Paxton Unified enclosures are engineered to house FlexPower® power management boards alongside Paxton AccessTM NET2 controllers in one compact, secure system.

To prevent damage to system electronics, the backplate seperates from the enclosure for NET2 mounting in the shop while wiring is pulled to the enclosure at the job site. Once configured, the backplate can be remounted for final ties and checkout.

 

Product Features:

  • Removable back plate simplifies job installation
  • Engineered backplate pattern minimizes installation time
  • Power boards mount on snap-in stand offs
  • Access boards mount on supplied threaded metal standoffs
  • Lifetime warranty

Agency Listings

Product Warranty

Product Guide

 

Need help selecting a product? 
Try out LSP Design Center with Guided and Advanced Build flows to help choose the best product for your application!

 

The input voltage for all wall mount models listed on this page is 120VAC except when the suffix "/E" is used, which indicates an input voltage of 230VAC.

 

Mechanical Refinements: 

  • Large enclosure depth to accommodate battery
  • 19 Gauge steel with textured black finish
  • Board mounting hardware provided
  • Lock and tamper switch standard

Integrated Access & Power

  • Unified Power all-in-one systems puts power and Paxton NET2 or BLU controllers in one secure locking enclosure
  • One AC drop minimizes wall space, simplifies installation, reduces time & labor costs
  • FlexPower® modularity and PCLASS versatility create unlimited system configurations
  • Network options for diagnostic monitoring and control of power, battery and connected devices

Labor Saving Enclosure Design

  • Factory pre-wired power section saves configuration time
  • Removable backplate simplifies controller wiring
  • Large enclosure depth accomodates battery sets
  • Multiple knockout areas along all four sides

System Refinements

  • Fault detection and reporting to host power and over the network with optional NetLink module
  • Large enclosures with room for increased power, added output distribution or remote monitoring
  • Modular power and distribution boards with snap-in standoffs simplify service and field upgrades
  • Cam lock set, tamper switch and backplate hardware to mount the access control panels is included

Product Information & Literature

 

Model Type Current/Voltage Input Outputs Lock Option Enclosure Wire Management Controller Mounting Datasheet Manuals CAD Models
FPO75-D8E4P Standard Single voltage
6A @ 12VDC or 3A @ 24VDC		 120VAC 8 auxiliary Standard cam lock E4:
24"H x 20"W x 6.5"D		 No Up to six (6) controllers PDF Paxton Enclosure CADs
FPO75-B100D8E4P Standard Dual voltage
2A @ 12VDC and 2A @ 24VDC		 120VAC 8 auxiliary Standard cam lock E4:
24"H x 20"W x 6.5"D		 No Up to six (6) controllers PDF Paxton Enclosure CADs
FPO75-M8NLCE4P Managed Single voltage
6A @ 12VDC or 3A @ 24VDC		 120VAC 8 managed lock Standard cam lock E4:
24"H x 20"W x 6.5"D		 No Up to six (6) controllers PDF Paxton Enclosure CADs
FPO75-B100M8NLCE4P Managed Dual voltage
2A @ 12VDC and 2A @ 24VDC		 120VAC 8 managed lock Standard cam lock E4:
24"H x 20"W x 6.5"D		 No Up to six (6) controllers PDF Paxton Enclosure CADs

 

 

 

Model Type Current/Voltage Input Outputs Lock Option Enclosure Wire Management Controller Mounting Datasheet Manuals CAD Models
FPO150-2D8E6P Standard Single voltage
12A @ 12VDC or 6A @ 24VDC		 120VAC 16 auxiliary Standard cam lock E6:
30"H x 23"W x 6.5"D		 No Up to nine (9) controllers PDF Paxton Enclosure CADs
FPO150-B100D8M8NLCE6P Managed Dual voltage
4A @ 12VDC and 4A @ 24VDC		 120VAC 8 managed lock, 8 auxiliary Standard cam lock E6:
30"H x 23"W x 6.5"D		 No Up to nine (9) controllers PDF Paxton Enclosure CADs
FPO150-D8M8NLCE6P Managed Single voltage
12A @ 12VDC or 6A @ 24VDC		 120VAC 8 managed lock, 8 auxiliary Standard cam lock E6:
30"H x 23"W x 6.5"D		 No Up to nine (9) controllers PDF Paxton Enclosure CADs
FPO150-B1002D8E6P Standard Dual voltage
4A @ 12VDC and 4A @ 24VDC		 120VAC 16 auxiliary Standard cam lock E6:
30"H x 23"W x 6.5"D		 No Up to nine (9) controllers PDF Paxton Enclosure CADs

 

 

Model Type Current/Voltage Input Outputs Lock Option Enclosure Wire Management Controller Mounting Datasheet Manuals CAD Models
FPO250-4D8E8P Standard Single voltage
20A @ 12VDC or 10A @ 24VDC		 120VAC 32 auxiliary Standard cam lock E8:
36"H x 30"W x 6.5"D		 No Up to fourteen (14) controllers PDF Paxton Enclosure CADs
FPO150/250-4D8E8P Standard Dual voltage
12A @ 12VDC and 10A @ 24VDC		 120VAC 32 auxiliary Standard cam lock E8:
36"H x 30"W x 6.5"D		 No Up to twelve (12) controllers PDF Paxton Enclosure CADs
FPO250-2D82M8NLCE8P Managed Single voltage
20A @ 12VDC or 10A @ 24VDC		 120VAC 16 managed lock, 16 auxiliary Standard cam lock E8:
36"H x 30"W x 6.5"D		 No Up to twelve (12) controllers PDF Paxton Enclosure CADs
FPO150/250-2D82M8NLCE8P Managed Dual voltage
12A @ 12VDC and 10A @ 24VDC		 120VAC 16 managed lock, 16 auxiliary Standard cam lock E8:
36"H x 30"W x 6.5"D		 No Up to twelve (12) controllers PDF Paxton Enclosure CADs

 

DoorsModelDimensions (inches)DatasheetManualsCAD Files
4E2P20Hx16Wx 4.5D
PDFn/aPaxton Enclosure CADs
6E4P24Hx20Wx6.5D
PDFn/aPaxton Enclosure CADs
9E6P30Hx23Wx6.5DPDFn/aPaxton Enclosure CADs
14E8P36Hx30Wx6.5D
PDFn/aPaxton Enclosure CADs

* Count can increase with controller double stacking. 

 

Related Products

  • Expansion Enclosures
  • LED Light Kits

Sign up for our Newsletters. Be the first to know of new product launches and more.

*
*
*
Captcha
Invalid
To Top