1. Products
  2. Unified Power
  3. Honeywell Unified

LifeSafety Power lead times for all Traditional, Unified and ProWire power systems are 10 days or less.

Honeywell Unified Power Solutions®

All-in-one power solutions for 4, 8, and 16 door Pro-Watch access controllers. Single, Dual Voltage / Networked.

Honeywell Unified Power Solutions offers maximum flexibility, functionality and savings to access system designers.

Honeywell Unified enclosures are engineered to house FlexPower® power management boards alongside Honeywell Pro-WatchTM access boards in one compact, secure system.

To prevent damage to system electronics, the backplate seperates from the enclosure for PW7 series board mounting in the shop while wiring is pulled to the enclosure at the job site. Once configured, the backplate can be remounted for final ties and checkout.

 

Product Features:

  • Removable back plate simplifies job installation
  • Engineered backplate pattern minimizes installation time
  • Power boards mount on snap-in stand offs
  • Access boards mount on supplied threaded metal standoffs
  • Lifetime warranty

Agency Listings

Product Warranty

Also available in ProWire Prewired and Rackmount configurations!

 

Need help selecting a product? 
Try out LSP Design Center with Guided and Advanced Build flows to help choose the best product for your application!

 

The input voltage for all wall mount models listed on this page is 120VAC, except when the suffix "/E" is used, which indicates an input voltage of 230VAC.

Mechanical Refinements: 

  • Large enclosure depth to accommodate battery
  • 19 Gauge steel with textured black finish
  • Board mounting hardware provided
  • Lock and tamper switch standard

Integrated Access & Power

  • Honeywell Unified Power all-in-one systems puts power and HW Pro-WatchTM panels in one secure locking enclosure
  • One AC drop minimizes wall space, simplifies installation, reduces time & labor costs
  • FlexPower modularity and versatility create unlimited system configurations
  • Network options for diagnostic monitoring and control of power, battery and connected devices

Labor Saving Enclosure Design

  • Factory pre-wired power section saves configuration time
  • Removable backplate simplifies controller wiring
  • Large enclosure depth accomodates battery sets
  • Multiple knockout areas along all four sides

System Refinements

  • Fault detection and reporting to host power and over the network with optional LifeSafety Power NetLink® module
  • Large enclosures with room for increased power, added output distribution or remote monitoring
  • Modular power and distribution boards with snap-in standoffs simplify service and field upgrades
  • Cam lock set, tamper switch and backplate hardware to mount the access control panels is included

Product Information & Literature

 

Model Type Current/Voltage Input Outputs Lock Option Enclosure Wire Management Controller Mounting Datasheet Manuals CAD Models
FPO75-D8PE4H Standard Single voltage
6A @ 12VDC or 3A @ 24VDC		 120VAC 8 auxiliary Standard cam lock E4:
24"H x 20"W x 6.5"D		 No PW7K1IC and two PW7K1R2 PDF Honeywell Enclosure CADs
FPO75-B100C4PD8PE4H Standard Dual voltage
2A @ 12VDC and 2A @ 24VDC		 120VAC 4 lock, 8 auxiliary Standard cam lock E4:
24"H x 20"W x 6.5"D		 No PW7K1IC and two PW7K1R2 PDF Honeywell Enclosure CADs
FPO75-B100M8PNLCE4H Managed Dual voltage
2A @ 12VDC and 2A @ 24VDC		 120VAC 8 managed lock Standard cam lock E4:
24"H x 20"W x 6.5"D		 No PW7K1IC and two PW7K1R2 PDF Honeywell Enclosure CADs

 

 

 

Model Type Current/Voltage Input Outputs Lock Option Enclosure Wire Management Controller Mounting Datasheet Manuals CAD Models
FPO150-D8PE8H Standard Single voltage
12A @ 12VDC or 6A @ 24VDC		 120VAC 8 auxiliary Standard cam lock E8:
36"H x 30"W x 6.5"D		 No PW7K1IC and five PW7K1R2 PDF Honeywell Enclosure CADs
FPO150-B100C8PD8PE8H Standard Dual voltage
4A @ 12VDC and 4A @ 24VDC		 120VAC 8 lock, 8 auxiliary Standard cam lock E8:
36"H x 30"W x 6.5"D		 No PW7K1IC and five PW7K1R2 PDF Honeywell Enclosure CADs
FPO150-B150D8PM8NLCE8H Managed Dual voltage
4A @ 12VDC and 4A @ 24VDC		 120VAC 8 managed lock, 8 auxiliary Standard cam lock E8:
36"H x 30"W x 6.5"D		 No PW7K1IC and five PW7K1R2 PDF Honeywell Enclosure CADs
Model Type Current/Voltage Input Outputs Lock Option Enclosure Wire Management Controller Mounting Datasheet Manuals CAD Models
FPO150-2D8PE8H1 Standard Single voltage
12A @ 12VDC or 6A @ 24VDC		 120VAC 16 auxiliary Standard cam lock E8:
36"H x 30"W x 6.5"D		 No PW7K1IC and nine PW7K1R2 PDF Honeywell Enclosure CADs
FPO150/250-2C8P2D8PE8H1 Standard Dual voltage
12A @ 12VDC and 10A @ 24VDC		 120VAC 16 lock Standard cam lock E8:
36"H x 30"W x 6.5"D		 No PW7K1IC and nine PW7K1R2 PDF Honeywell Enclosure CADs
FPO150/250-2D8P2M8NLCE8H1 Managed Dual voltage
12A @ 12VDC and 10A @ 24VDC		 120VAC 16 managed lock, 16 auxiliary Standard cam lock E8:
36"H x 30"W x 6.5"D		 No PW7K1IC and nine PW7K1R2 PDF Honeywell Enclosure CADs

 

DoorsModelDimensions (inches)DatasheetManualsCAD FilesNote
4-6E4H24Hx20Wx6.5D
PDFn/aHoneywell Enclosure CADs 
4-6E4H124Hx20Wx6.5DPDFn/aHoneywell Enclosure CADs 
8-14E8H36Hx30Wx6.5DPDFn/aHoneywell Enclosure CADs 
8-12E8H136Hx30Wx6.5D
PDFn/aHoneywell Enclosure CADs 
12-16E8MH36Hx30Wx6.5D
PDFn/an/aAll access enclosure

 

 

Related Products

  • Expansion Enclosures
  • Honeywell ProWire® Prewired Power Sytems
  • Honeywell Integrated Rackmount

Sign up for our Newsletters. Be the first to know of new product launches and more.

*
*
*
Captcha
Invalid
To Top