LifeSafety Power

 NetLink Current Revisions and MIB Files

Below are the latest firmware revisions for products using firmware. Consult the product's user manual for update instructions.

Please read our Cyber-security Guidelines

Sign up for our Firmware Updates Mailing List to receive email notification when a new firmware revision is available!

*If NL2 or NL4's firmware to be upgraded is below rev 7.15, then firmware must first be upgraded to rev 7.15 before upgrade to rev 8.10.  See below for bridge updates

**If NL2 or NL4's firmware to be upgraded is below rev 8.10, then firmware must first be upgraded to rev 8.10 before upgrade to the latest version.  If firmware is below 7.15, firmware must be upgraded to 7.15 before upgrading to 8.10.  See below for bridge updates

***If NL2 or NL4's daughter board is GREEN and the firmware to be upgraded is below rev 9.18, then firmware must first be upgraded to rev 9.18 before upgrade to the latest version.  If firmware is below 8.10, firmware must be upgraded to 8.10 before upgrading to 9.18. If firmware is below 7.15, firmware must be upgraded to 7.15 before upgrading to 8.10.  See below for bridge updates

Note The browser history / cache should be cleared after performing the firmware upgrade and before accessing the device again to prevent any cached pages from giving outdated information

 Bridge Updates

These bridge updates must be installed before updating to the newest firmware revision if the currently installed firmware is below the bridge revisions. Note that these are not the newest firmware - see above for the latest revision

 Access Integrations

The NetLink NL2 and NL4 modules are able to be integrated into many Access Control pannel interfaces.

See the NetLink Integrations page for the current list of integrations.

Some integrations require files from LSP to operate. See the appropriate tab for these files. Contact the Access Control manufacturer for more information on these integrations.

 MSM Enterprise Software Download

MSM Enterprise is a software-based package allowing user to assess,manage,and monitor systems using NetLink anywhere in the world.

More Information

 Mercury NetLink Integration Firmware

This firmware should only be installed in applications where the NetLink is being integrated into the Mercury reseller’s interface when using EP Series controllers. LP Series controllers can use the standard NetLink firmware. Check with your Mercury reseller to see if they have enabled NetLink integration. All required bridge updates must be installed before this update.

 Genetec Security Center Integration

Software to integrate NetLink devices into the Genetec Security Center interface using the LSPEntity Software. License must be obtained from This e-mail address is being protected from spambots. You need JavaScript enabled to view it using part number GSC-1SDK-LSP-NetLink.

 Software House CCURE 9000 Integration Driver

Driver to integrate NetLink devices into the CCURE 9000 interface. License must be obtained from Software House. Check the compatibility matrix for requirements.

 NPR Current Revision and MIB File

Below is the latest firmware revision for the NetPower NPR. Consult the NetPower NPR user manual for update instructions.

Note The browser history / cache should be cleared after performing the firmware upgrade and before accessing the device again to prevent any cached pages from giving outdated information.

 NetLink Network Scanner Software

Software package for finding LSP Devices and their IP addresses on a local network using a PC.

Download

 PowerCom USB Software

Software package for use with a DATALINK cable to interface a PC with an FPO power supply through USB. Note that this software is not required for NetLink modules.

Download

Manual

 Discontinued Products

These products are discontinued - The download here is the last Firmware revision.